Access Doors, Panels and Hatches

Optional Finish: SS- Stainless Steel

---

AT Series – Acoustical Tile Access Doors

Doors are designed for use with acoustical tile or gypsum board walls and ceilings. The door is engineered to install flush, virtually concealed. Door is recessed 5/8″ to accept acoustical tile or gypsum board.

Door is 16 gage and frame is 12 gage, galvannealed steel with a prime coat finish.

Concealed Hinge operates completely out of sight so that only the metal thickness of the door and frame is visible.

Latch is screwdriver operated.

Optional Latches: CL- Cylinder Lock • AKL- Allen Key Latch

---

 SLA – Slammer Access Doors

Doors are designed to provide security access with the strength and durability to withstand abusive and vandal-prone conditions prevalent in many institutions. Without sacrificing security, these doors allow maintenance personnel access to plumbing chases, shut-off valves and electrical apparatus located behind finished walls. Door is fabricated from 10 gage steel and is provided with a high security, vandal resistant, detention type lock. Doors can be manufactured with locks provided by others.

Frame is 3/16″ x 2″ x 2″ angle steel, welded and with pre-punched mounting holes.

Latch is a detention type dead bolt lock with paracentric key.

Hinges are heavy duty and are welded to the door and frame.

Finish is a prime coat suitable for painting.

Option: LD- Lock by Others

---

AP Series – Acoustical Plaster Access Doors

Doors are designed to install flush with the plaster surface assuring an attractive finish. Doors are recessed 5/8″ and lined with a metal lath to allow plaster of surrounding surfaces to fill in the face of the door.

Door and Frame are fabricated from 16 gage, galvannealed steel with a prime coat finish.

Frame has a 3″ wide metal lath on all four sides to key into the plaster.

Concealed Hinge is recessed and operates completely out of sight so that only the metal thickness of the door and frame is visible.

Latch is screwdriver operated.

Finish is a prime coat suitable for painting.

Optional Latches: CL- Cylinder Lock • AKL- Allen Key Latch

---

SLK – Shur-Lok Access Doors (drywall, masonry or concrete)

Doors are designed for drywall, masonry or concrete construction and provide the security required in today’s schools, hospitals, hotels, and correctional institutions.

Door and Frame are fabricated from 14 gage, galvannealed steel and the door is provided with a 16 gage vertical reinforcement channel.

Lock is an automatic springbolt type featuring a precision mechanism. When the door is closed in the locked position, the uniquely designed angled cam lock automatically engages. The key can only be removed when the lock is in the locked position.

Hinge is a concealed type.

Concealed Pivoting Rod Hinge prevents distortion and closes door squarely. Doors 24″ or larger are provided with a continuous piano hinge.

Finish is a prime coat suitable for painting.

Optional Finish:
SS- Stainless Steel

---

SF – Shur-Lok Access Doors (drywall, masonry, plaster)


Doors are designed for surface installation on drywall, masonry or thin-coat plaster. Door features rounded safety corners and is attached to the frame with a continuous piano hinge allowing a 175 degree opening.

Door and Frame are fabricated from 14 gage, galvannealed steel.

Frame is easily secured to the studs and anchored through predrilled holes in each corner.

Latch is screwdriver operated.

Finish is a prime coat suitable for painting.

Optional Latches: CL- Cylinder Lock • AKL- Allen Key Latch • TH- T Handle

---

DT – Duct Access Doors (insulated)

Doors are designed to provide access to equipment installed within ducts. The door panels are insulated and gaskets between the panel and frame will assure tight seals without obstruction in the air system.

Door and Frame are fabricated from 24 gage, galvanized steel.

Door is 1″ thick, double wall construction and insulated.

Frame is provided with knock-over tabs and easily attached to the duct.

Hinge is continuous piano type.

Cam Latch is self-tightening and hand operated.

Optional Latches: CNH- Cam Latch-No Hinge

---

FIRE-RATED / RESISTANT

FR Series – Fire Rated Access Doors

Doors are Fire Rated by Underwriters Laboratories Inc., for 1-1/2 hours, “B” Label, and meet ANSI-UL 10B standard. Door has a heavy duty spring closer to assure positive latching when panel closes. This door is for wall installation only.

Door and Frame are fabricated from 16 gage, galvannealed steel with a prime coat finish. Door has a heavy duty spring to assure positive latching.

Frame is equipped with both masonry anchors and bolt holes to facilitate installation in all types of wall construction.

Concealed Hinge operates completely out of sight so that only the door and frame is visible.

Exterior Latch is recessed and is operated using a ring attached to the sliding bolt.

Interior Latch Release Slide is included enabling door to be opened from the inside.

Finish is a prime coat suitable for painting.